In this tutorial I will instruct you how to use CG 500-35 which has been especially developed for gluing Swarovski Crystals for professional use only!
The surfaces to be glued must be clean,dry and free from oil or grease.
Place component A (Epoxy Resin) and component B
(Hardener) in a 1:1 ratio (two equal strands) in a mixing container
Thoroughly mix the the two components.
Using a gluing aid, add an appropriate quantity of glue to the two surfaces to be
glued and place them together exerting a light pressure.
The activation time of the adhesive is about 60 minutes at room temperature